This is a base board for the ESP8266 based ESP-01 board. It gets its power via USB and connects the ESP8266 UART via a FTDI FT232R. Also it exposes th...
These are WS2812B Breakouts for a RGB Wordclock.
The gerber files include long dash milling around all segments.
Every 3 LED segment can be cut and ...
Raspberry UPS for shutting down Raspberry A and B in case of power failure. Avoid SD card corruption by shutting down the operating system of the rasp...
This is a small dev board I designed to make experimenting with and deploying the ESP8266 ESP-03 modules a bit easier. More info here: http://nathan.c...
Sea-of-pads board for "ugly" prototyping of analog and RF circuits - similar to "Manhattan" construction but you don't have to cut and glue pads onto ...
Sea-of-pads board for "ugly" prototyping of analog and RF circuits - similar to "Manhattan" construction but you don't have to cut and glue pads onto ...
This is a actually a General Purpose board for a GPS module and a 20x4 LCD screen also includes a SD Card reader and Rotary Encoder.
Alternatively a ...
Small board to mount the Si7021 Humidity and Temperature sensor on. With the screwholes in the middle and a small plate you can fix the board to a thi...
pKubik is a small quadruped robot, controlled by arduino. This board serves as a breakout board for all the servos, as well as the robot's body. Infor...
Use this board to play with the PIC10F322.
Three LEDs and 4 buttons are available, plus a small breadboard area.
One header for connection to the Pi...