PIC 16F1847, 16F84A or 16F1503

Design by: 5791

Breackout for dual use, PIC 16Fxxxx 14 pin and 18 pin chips. It has 3 jumpers to select which type of PIC will be installed, for use with the ICSP header (In Circuit Serial Programmer). CLK and DAT jumpers do not need to be populated if the ICSP header will not be used. Includes a micro USB connector for 5V power with any cheap wall adapter, and a header for 7 to 14V input, connected to a 7805 to reduce it to 5V. You can also replace with a 7803SR module for low voltage PICs. Led 1 indicates power in. The top area is an independent 6 x TIP120 circuit, for high power output, only shares the GND with the PIC circuit. It is an "Open Collector" circuit, you can drive with whatever voltage you want as long as is within the range for the TIP120. You can install components only in the TIP120 area to use it as a driver with other boards. The input pins for each transistor are in a header and can be cabled to anything.